Premier Welding Services Ltd

Welding aluminium with a MIG welder

Welding aluminium with a MIG welder

Traditionally, aluminium has been a material that has tended to be welded using a TIG welder. This is due to the fact that MIG welding puts a lot of heat into the metal. This is fine when welding steel, but when welding a metal with a lower melting point, like aluminium, it tends to cause distortion and burn throughs.

The Speed of TIG Welding vs MIG Welding

On the downside, TIG welding is a more complicated process and is significantly slower. These factors have led to the development of Pulsed MIG welding. Pulsed MIG welders use a pulsed current that is turned on when transferring material and turned off immediately afterwards. This gives the weld time to cool and helps prevent you from burning through aluminium. Also, because it's a MIG process, it can take a third of the time to complete a welding job when compared to TIG, which makes Pulsed MIG an attractive proposition for fabricators.

The Price of MIG and TIG Welding

For DIY welders, a pulsed MIG or a TIG welder might be out of their price range. If you have two pieces of aluminium that you'd like to join together and aren't too worried about accidentally wrecking them (for example, if they aren't a visually important section of your car's bodywork), then here's a few tips on how to weld aluminium with a MIG:

  1. Don't try to weld aluminium that is too thin. A TIG welder can weld aluminium foil - don't expect to be able to do the same with a MIG welder.
  2. Clean the surface very thoroughly to remove any aluminium oxide. A stainless steel wire brush can be used for this, but don't use one that has been used on steel before, as you may end up contaminating the surface. Also, brush in one direction to avoid rubbing the oxide into the aluminium.
  3. Use a brass heatsink. Unless you move your welding gun very quickly, which will inevitably make your welding messy, the heat from a MIG welder will blow holes in the aluminium. A brass heatsink that is clamped behind the aluminium will dissipate much of the heat and allow the aluminium to be welded at a reasonable pace. It is advisable to proceed in short bursts, much as you would for thin steel.
Posted by Premier Welding

Latest News

Growth Of The Welding Industry

Welding is an essential part of most industries. From manufacturing industries to services industries it is a vital component of any industry. It..

New Warnings From The Health And Safety Executive

The welding industry has long fallen under the Health and Safety Executive's wing, given the many inherent dangers in the practice. The dangers are bo..

Simplified Welding Technology: Why You Need It

The world is changing each day and so does the welding industry. Globally, the markets are more competitive than ever and are demanding high-quality w..

Filler Deoxidisers and Their Increased Importance

Quality welding is about understanding the different elements that contribute to the process. Filler metals are some of the materials that are used in..