Premier Welding Services Ltd
  • Hypertherm Powermax30 XP

Hypertherm Powermax30 XP

Contact us

Speak to one of our team now for more information or to purchase this product.

Enquire Now!

The Powermax30 XP is a highly portable, 30 A, handheld plasma cutting system appropriate for a wide range of applications. It uses air or nitrogen to cut electrically conductive metals, such as mild steel, stainless steel, or aluminum.

Operating data

 Capacity Thickness Cut speed
  Cutting
Recommended 10 mm (3/8") 500 mm/min (20 ipm)
  12 mm (1/2") 250 mm/min (10 ipm)
Severance 16 mm (5/8") 125 mm/min (5 ipm)

Relative cut performance on mild steel

Powermax 30 XP cut performance

Specifications

Input voltages 120-240 V, 1-PH, 50/60 Hz
Input current @ 3.8 kW 120-240 V, 1-PH, 25-18.8 A
Output current 15-30 A
Rated output voltage 125 VDC
Duty cycle @ 40°C (104°F) 35%, 240 V
20%, 120 V
Open circuit voltage (OCV) 256 VDC
Dimensions with handles 356 mm (14.0") D; 168 mm (6.6") W; 305 mm (12.0") H
Weight w/ 4,5 m (15') torch CSA: 9.7 kg (21.4 lbs)
CE, CCC: 9.5 kg (21 lbs)
Gas Supply Clean, dry, oil-free air or nitrogen
Recommended gas inlet
flow rate / pressure
113.3 l/min (4 scfm) at 5.5 bar (80 psi)
Input power cable length 3 m (10')
Power supply type Inverter - IGBT
Engine drive requirement 5.5 kW for full 30 A output
Certifications CSA-certified for use in the Americas and Asia, except China
CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
CCC for use in China.
Warranty Power supplies have a 3-year warranty and torches a 1-year warranty.

Cutting with 120 V input power

Use FineCut nozzle and deflector for cutting at 120 V input power. When operating at the maximum recommended output of 25 A, the cut capacities are:

  • 6 mm (1/4") at 482 mm/min (19 ipm)
  • 10 mm (3/8") at 203 mm/min (8 ipm)
  • 12 mm (1/2") at 76 mm/min (3 ipm)

Duramax LT Torch

  • Designed to withstand impact and heat.
  • Twice the consumable life* and 70% more efficient on average for lower cost of cutting compared to Powermax30.

Specifications

Input voltages120-240 V, 1-PH, 50/60 Hz
Input current @ 3.8 kW120-240 V, 1-PH, 25-18.8 A
Output current15-30 A
Rated output voltage125 VDC
Duty cycle @ 40°C (104°F)35%, 240 V,
20%, 120 V
Open circuit voltage (OCV)256 VDC
Dimensions with handles356 mm (14.0") D; 168 mm (6.6") W; 305 mm (12.0") H
Weight w/ 4,5 m (15') torchCSA: 9.7 kg (21.4 lbs)
Gas SupplyClean, dry, oil-free air or nitrogen
Recommended gas inlet flow rate / pressure113.3 l/min (4 scfm) at 5.5 bar (80 psi)
Input power cable length3 m (10')
Power supply typeInverter - IGBT
Engine drive requirement5.5 kW for full 30 A output
CertificationsCSA-certified for use in the Americas and Asia, except China. CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted. CCC for use in China.
WarrantyPower supplies have a 3-year warranty and torches a 1-year warranty.

Cutting with 120 V input power

Use FineCut nozzle and deflector for cutting at 120 V input power. When operating at the maximum recommended output of 25 A, the cut capacities are:

  • 6 mm (1/4") at 482 mm/min (19 ipm)
  • 10 mm (3/8") at 203 mm/min (8 ipm)
  • 12 mm (1/2") at 76 mm/min (3 ipm)

Duramax LT Torch

  • Designed to withstand impact and heat.
  • Twice the consumable life* and 70% more efficient on average for lower cost of cutting.

*compared to Powermax30

75° hand torch

75° hand torch

Duramax LT consumables

Shield/Deflector Retaining cap Nozzle Electrode Swirl ring
Standard Standard Shield/Deflector Standard Retaining cap Standard Nozzle Standard Electrode Standard Swirl ring
FineCut FineCut Shield/Deflector FineCut Retaining cap FineCut Nozzle FineCut Electrode FineCut Swirl ring
Consumable type Torch type Amperage Shield/Deflector Retaining cap Nozzle Electrode Swirl ring
Drag cutting Hand 30 420116 420114 420118* 420120 420211
FineCut Hand 30 420115 420117**

* Standard nozzle and electrode kit 428243 also available containing a quantity of 2 Electrodes (420120) and 2 standard Nozzles (420118).
** FineCut nozzle and electrode kit 428244 also available containing a quantity of 2 Electrodes (420120) and 2 FineCut Nozzles (420117).

HyAccess consumables

Retaining cap Nozzle Electrode Swirl ring
Powermax30 XP Retaining cap Powermax30 XP Nozzle Powermax30 XP Electrode Powermax30 XP Swirl ring
Consumable typeTorch typeAmperageElectrodeNozzle, cuttingNozzle, gougingRetaining capSwirl ring
HyAccessHand15-45420137420144420147420148220670

Write a review

Note: HTML is not translated!
    Bad           Good