Premier Welding Services Ltd
  • Lincoln MAXsa 22 Feed Head - K2370-2

Lincoln MAXsa 22 Feed Head - K2370-2

Contact us

Speak to one of our team now for more information or to purchase this product.

Enquire Now!

Top Features of the MAXsa 22 Feed Head K2370-2

  • Flexible Configuration – Can be used in single, tandem, Twinarc® or multiple arc applications.
  • Closed Loop Speed Control – Facilitates full control over starting, running and stopping wire feed speed.
  • IP23 Rated – Tested to withstand harsh environments.
  • Additional Gear Sets included – Used to change the speed ratio to match the requirements of your application.
  • Multi-Axis Rotation – Rotational feed head adjustment in two planes.

Features & Benefits

Submerged Arc Hard Automation Feed Head

Designed specifically for hard automation applications, the MAXsa® 22 Feed Head delivers accurate wire feeding of large diameter submerged arc wires. Based on Lincoln’s proven gearbox and cast aluminum feedplate, the MAXsa® 22 model features a 40VDC permanent magnet, high torque motor that delivers plenty of traction to push up to 7/32 in. (5.6 mm) diameter solid wire. A top speed of up to 500 ipm (11.43 m/min) can be achieved by changing the gear ratio.

  • Flexible Configuration – Can be used in single, tandem, Twinarc® or multiple arc applications.
  • Closed Loop Speed Control – Facilitates full control over starting, running and stopping wire feed speed.
  • IP23 Rated – Tested to withstand harsh environments.
  • Additional Gear Sets included – Used to change the speed ratio to match the requirements of your application.
  • Multi-Axis Rotation – Rotational feed head adjustment in two planes allows flexible, accurate setup for fixturing or arc locating. Additional positioning flexibility can be achieved with optional horizontal and vertical lift adjusters.
  • Standard Accessories – Including an adjustable wire straightener, cross-seam adjuster and electrical valve flux hopper and mounting bracket for TC-3 carriage.

The MAXsa™ 22 is designed specifically for hard automation applications, the MAXsa™ 22 Wire Drive delivers accurate wire feeding of large diameter submerged arc wires. Based on Lincoln’s proven gearbox and cast aluminium feedplate, the MAXsa™ 22 model features a 32VDC permanent magnet, high torque motor that delivers plenty of traction to push up to 7/32 in. (5.6mm) diameter solid wire. A top speed of up to 500 ipm (11.43m/min) can be achieved by changing the gear ratio.

  • Process controller - Provides clear dual digital display of set-up and weld modes, eight memories, AC controls, strike/start/end options, travel stop/start, and timers.
  • Lincoln’s Waveform Control Technology® - Offers the ability to select the right waveform for each application.
  • Severe Duty - Can be stored outdoors.
  • User-Friendly Controls – Can be adjusted on-the-fly to change welding parameters within the same welding mode
  • Controller with Digital Meters - Save procedures, apply procedure limits, and lockout any or all controls.

Specifications

Solid Wire Size Range

  • 1.6-5.6
  • 1.6-2.4
  • 1.6-2.4

Wire Speed Range IPM (m/min)

  • 0.25-5.08
  • 0.25-7.62
  • 1.0-12.7m/min

Dimensions (H x W x D)

  • 597 mm x 432 mm x 508 mm

Net Weight

  • 31.752 kg

CAD File Downloads

Please note if you experience any trouble downloading when clicking on the link, right click and save to your computer using the save option.

Write a review

Note: HTML is not translated!
    Bad           Good